How to Fix Epson Error Code 0x9A?

Fix Epson Error Code 0x9A:

Several devices, such as printers and computers, have been developed as a result of technological advances. As a result, we can now do our tasks more efficiently and in less time. Unfortunately, printers, despite their high-end nature, are not immune to technical issues. As a result, they might be very inconvenient for users. Epson printer error code 0x9A is one of those frustrating critical errors that many Epson users experience.

Due to a lack of expertise and adequate solutions, users are unable to correct this problem. Some of them even begin looking for a service provider who can assist them. However, the issue is minor and can be fixed without the assistance of professionals. If you're having trouble with the same issue, this article can be beneficial to fix Epson Error Code 0x9A.

Causes of Epson Printer Error Code 0x9A

The most common cause of Epson Error Code 0x9A is a problem with the printer cartridge. However, this isn't the only factor that can lead to an error.

Epson error code 0x9A can also occur when debris or pieces of paper obstruct the paper tray, the encoder strip is dislocated, or the rails are damaged, to name a few examples.

In addition, hardware issues, such as a faulty printer belt or gear, printhead, or carriage driving motor, might potentially cause the error in some rare cases. In such instances, you have no choice but to seek the assistance of Epson Support experts.

However, we recommend that you first try the steps listed below to troubleshoot Epson Error code 0x9A on yourself.

Effective Ways to Eliminate Epson Printer Error Code 0x9A

Take a look at how to fix Epson printer error code 0x9A manually.

Method 1: Clean the Epson Printer

Step 1: First, cancel all printing jobs currently ongoing on your computer and open the printer's top cover.

Step 2: Examine the inside of the printer for dirt, trash, paper pins, staple pins, scraps of paper, and so on.

Step 3: Then, gently take the stuck-in objects out of the output tray and sheet feeder.

Step 4: After that, press the Start button to resume the printing process for a while.

Step 5: If the Epson product continues to display an error, proceed to the next step.

Step 6: To switch off the printer, press the Power button.

Step 7: Lift the scanner unit and remove the jammed paper and any ripped bits after that.

Step 8: To turn on the printer, lower the scanning unit and hit the power button simultaneously.

Step 9: Then, to load new papers, follow all of the paper loading instructions.

Step 10: Finally, print a test page to confirm that the printer is printing successfully and that the error number 0x9A is not displayed.

Method 2: Check the Printer’s Carriage

Lift the Epson printer's top lid to see if the carriage is moving automatically or not. If the carriage does not move, try manually moving it.

If you can't, blow compressed air into the printer's enclosure to clear out the dirt. Then, return the lid to the printer and turn it on to see if the Epson printer error code 0x9A has gone.

Method 3: Clean the Encoder Strip

An encoder strip is a plastic strip used by the carriage of a printer to determine its speed and position. If the encoder strip is unclean, the Epson printer error code 0x9A can appear. As a result, to address the problem, you must inspect and clean it.

How to clean the encoder strip is described below:

Step 1: First, remove the printer's top lid and turn it off.

Step 2: Soak a delicate cleaning cloth in the ink-cleaning solution for a few minutes.

Step 3: Wipe the encoder strip on the left side with the cleaning cloth gently.

Step 4: Wipe away any remaining ink from the encoder strip, excluding the printhead-covered areas.

Step 5: Take extra care not to let the ink solution drip into the printer. Otherwise, you can use a dry cleaning cloth to wipe it down to avoid interior damage.

It's worth noting that pulling or rubbing the encoder strip too hard will damage it and cause it to malfunction.