If you are planning to replace your ink cartridges, then you must have replacement cartridges ready with you. You need to install the new ink cartridges once you are done taking out the old ink cartridges.
Although you need to leave the old cartridges in the printer before you get ready to replace them so that they don’t dry up. Also, you must not open up the packages of ink cartridges until you are ready to install it in the printer. In order to maintain reliability, cartridges are vacuum packed. Mentioned below are some of the steps that you need to follow in order to install ink cartridge in epson wf-3720.
Step 1 : First of all to install ink cartridge in epson wf-3720, turn on your printer. In case the ink cartridge has been expended, then a message will come up in front of you on the LCD screen. Check which kind of ink cartridges are needed to be replaced and then select cancel errors and then select replace now.
Step 2 : In case you replace the ink cartridges before you see the message on the LCD screen, then you need to go to the home button if required. There you need to choose maintenance, ink cartridge replacement and then go to Next and then finally Start.
Step 3 : Lift the unit of scanner and wait for it to click. Don’t use your hand for moving the printhead. As there is a chance that you may end up damaging the product.
Step 4 : Squeeze the tab that is placed over the cartridge and keep the ink cartridge straight in order to remove it. Don’t shake the cartridges once you have opened up the packages or there is a chance that the ink may leak.
Step 5 : To install ink cartridge in epson wf-3720, take the cartridge out of the package.
Step 6 : Take out the yellow tape that is covering the cartridge. Do not take off any other seals or labels.
Step 7 : Place a new cartridge inside the holder and please ensure that it clicks into the right place.
Step 8 : Lower the unit of scanner and click on the option of completed that is displayed on the LCD screen.
The print head will go back to its home position and your printer will begin to charge the ink. This is going to take around 90 seconds. When a confirmation message shows up on the screen, then your ink will get fully charged.
Also, you need to be careful and you must not turn off the printer light is flashing continuously as the ink will get wasted that way.
In case an error screen opens up stating that your ink cartridge has been installed in a wrong manner, then you need to lift the scanner unit and lift it till it clicks into the right place. Once you are done, click on ok.