How do I Connect Canon MG3500 Printer to WiFi?

Connect the Canon mg3500 Printer to WiFi:

Using a Windows computer and WiFi protected setup (WPS), connect the Canon mg 3500 to a wireless network.

Step 1: Ensure your printer is turned on and that the green light for connecting the Canon printer is turned on.

Step 2: There will be light next to the power button. When the printer is turned on, push and hold the printer's WiFi button until the amber alarm light blinks.

Step 3: After the flash, press the WiFi button once more. Make sure the WiFi light is flashing rapidly and the power light is on simultaneously.

Step 4: Next, on your wireless router or access point, press and hold the WPS button.

Step 5: Depending on your router, you may see a button that looks like this. When the WiFi light begins to flash, both the WiFi and the on light become steady. Now that the printer and wireless network are connected, you can connect a Canon printer to a Windows or Mac computer.

Steps to Connect Canon MG3500 Printer to WiFi-

Set up the software. Connect your Canon mg3500 to WiFi by inserting the supplied cd-rom into your PC. Next, visit canon comm /ij setup to download the installation files from the Canon website. To install the mg 3500 printer's driver and software, click the links below.

To get started, open the downloaded file on your computer and review the information on the first screen. After you click Next, the setup guide will be downloaded and installed. Choose a wireless connection as your mode of connection.

To make sure your printer is turned on, click Next. Next, connect to the network by clicking the connect button. When you press the WPS button, a WPS configuration screen will show.

Click Next on the next two screens to see a list of applications, then Next on the License Agreement. Finally, a screen will appear; select yes to proceed with the installation. The software will now be installed if you continue with the installation. When the set of completion dialogue boxes displays, it may take several minutes.

The printhead alignment screen will appear once you click finish. After that, click. After you've completed the software setup, you'll be required to register your product.

If you choose to register now, a new window will open after you've completed your registration. After that, you are free to proceed with the installation. The test print window has now been shown.

WiFi Connection for Canon Pixma Mg3500 Printer

If you want to print a test page, but plain paper in the printer. You can avoid the test printing if you click execute after the test printing. To complete the installation, click Next once you see the installation completed screen successfully. Then, connect the Canon mg3500 to a wireless network and print.