How to Fix Error B200 for Canon Pixma MP560 Printer?

Hello, Please let me know about how to fix error b200 for canon pixma mp560 printer.I bought this canon pixma mp560 printer. But don't know how to setup it. Help me.

Share

Fix Error B200 for Canon Pixma MP560 Printer:

In case you are using a Canon inkjet printer, then you must have faced the problem of B200 during some point of life. This error has caused problems to the users a large number of times. But there is nothing to worry about as there is a way to get rid of this problem. This basic guide is given below that will solve your problem of how to fix error b200 for Canon pixma mp560 printer. If you adopt this method to solve your problem, then the success rate is going to be very high.

Error B200 Causes what Leads to this Error?

This error generally arises when several ink formulas are used by the printer. These different formulas are made when we refill or replace OEM cartridge using printing supplies that do not have good build quality or toner quality. So, it is recommended for you to purchase from legitimate vendors only for use or refill.

How to Fix Error B200 for Canon Pixma MP560 Printer?

So, these are some of the steps that one is required to follow to troubleshoot the b200 error.

Step 1: Switch off your printer and disconnect it from the power source.

Step 2: Open the cover of your printer for revealing the ink cartridges.

Step 3: Take out the ink cartridges.

Step 4: Be careful while taking out the printhead for the printer. Carefully handle everything and make sure none of the components get damaged. Neither should it cause any damage to the cables connected. You must not use excessive force at the time of disconnecting the wires.

Step 5: Clean both the ink cartridges as well as the printer. This guide is going to help you in cleaning them properly.

Step 6: Use a contact cleaner for cleaning contact pad. You can also take a pencil and eraser for cleaning it.

Step 7: After that, you need to reinstall your printehead and then install the ink cartridges. In case the error comes up again, then you need to go to the next phase.

Phase 2:

In the next phase you must have an internet connection. Plus, you must have administrator access on your computer system.

Step 1: Update the drivers of your printer and update the utility software of the Canon InkJet printer.

Step 2: Go to the Windows desktop and then click on Start. After that, you need to move to the devices and printers.

Step 3: Right click on Canon Pixma MP560 and then go to properties and click on it.

Step 4: Go to the maintenance tab and then click on deep cleaning.

Step 5: Under the maintenance tab and run a nozzle check once the deep cleaning is over.

  • 0

How to Fix Error B200 for Canon Pixma MP560 Printer?

Post Your Answer

Is This Service Helpfull to You?

Our Services are rated based on 66 ratings on Google & Featured Customers