How to Fix Canon Printer Error Code B203?

Fix Canon Printer Error Code b203:

If you are getting frustrated with this error b203 problem on your canon printer, then we are here for you. I am going to discuss canon printer error b203; through this, you can fix the issue. Here we discussed the problem, why this Canon support code b203 comes and after that, we discussed the solutions.

However, to solve this canon printer error b203 we contact at the service center and we get it help from our canon support team, At that time we have been able to dismiss the error but only for some time.

Although, most of the errors in printer arise due to issues such as improper uninstall of a program, installation of new program or deletion of important files. In some cases, it also can be hardware related such as paper jams, incorrect installation of ink tanks and so on.

What is Error B203 in Canon Printer?

Along with many of the printer errors this problem is also related to jam but it is doubtful is a paper jam. We have received data offline and online many people have stated this issue differently. So, first, we make a list of most of the probable issues. The reason behind the canon printer error code b203 this error.

The printhead is damaged or jam Recently firmware update.

Fix Canon Printer Error B203 - Follow These Given Below Steps:

Step 1 : First thing you have to do switch off your printer and confirm that the entire ink cartridges are full.

Step 2 : You may pull the entire ink cartridge out of the printer and confirm that there is a lot of ink in them.

Step 3 : Switch your printer “ON” and what you have to do is to allow the print head to move to the left-hand side of the printer.

Step 4 : You have to wait unless the print head moves to the left-hand side.

Step 5 : It will turn your printer load its configuration settings and it will try to clear oneself from inside.

Step 6 : If it fails to clear itself, you have to repeat the process and print head must not be placed upon the left-hand side at all.

It must be on the right-hand side. And you have to repeat the process. Once in a while, if your computer screen shows this error message, this canon printer error code b203.

Although to resolve Canon support code b203, we need to reach the service center to get this issue solved, but as a result of the assistance from our canon specialized expert team, we have had the choice to make some changes to delete this error message for some time.

Even though the fact that the major part of the printer errors on a computer occurs because of issues such as improper uninstall of computer programs, incorrect setup of new software or inappropriate installation of significant documents.

Now and then it besides can be hardware associated such as paper jams, invalid installation of an ink cartridge, etc.

Scanning of a Document from Your Canon Printer:

No matter what the printer error you are having, it is always important to make a speedy scan over your printer troubleshooter to repair the internal issues in the printer that may cause the printer b203 error.

• Install canon scan utility software from the official canon website that is suitable for your printer.
• Tap on start scan to make a scan of the documents from either scanner glass or the paper feed tray over your printer.
• Tap on Next and now tap on Fix Now to resolve the printer error being detected.
• Reboot your printer to make it save all the settings you made.

Check for Paper Jam:

Just a small and jetsam bit of paper or a little piece of the pin or a paper clip may equally the cause for this Canon b203 printer error to occur. So, check your printer carefully inside the printer that anything is blocking the printer.

Allow the print head to move freely in the printer. Remove the stuff to restore the printer to its working state.

Uninstall & Reconfigure Canon Printer-

If you see things not working out for you & none to the steps were able to correct the issue then it's probably time to uninstall the printer driver & reconfigure the printer driver again.

To fix this canon b203 issue, switch off the printer and open the device and press down the ink tanks to their positions firmly until they click.

Canon Printer Error Code B203:

A lot of people are bothered by Canon printer error B203. This is a common error that you see on Canon printers. A lot f things can lead to this error. Below, we have mentioned what causes Canon printer error code B203 and how you can fix it. 

What Causes Canon Printer Error Code B203?

This error can appear if there are minor issues with your printing machine like paper jam, empty cartridge, or outdated printer driver. If you use a Canon printer, then you must have come across this error while trying to print something.

This error may not let you complete a printing task on your Canon printer and you continue to see the error code B203. Some of the common causes that lead to the Canon printer error code B203.

• Wrong installation of the cartridges
• Empty cartridges
• Damaged printhead
• Outdated firmware 
• Improper connection
• Outdated printer driver

How can I Resolve Canon Printer Error Code B203?

If you wish to get rid of error code B203, then below are the solutions that you need to apply to fix your problem. 

1) Perform a Power Cycle

Below are the steps that you need to carry out in order to perform a power cycle on your Canon printer. 

• In the first step, you are required to turn off your Canon printer device.
• After that, you must disconnect the power wire from the electrical outlet. 
• Then, you need to hold down the power button for one minute and then restart your printer.
• After that, connect the power wire to the printer. 
• Now, check whether your Canon printer error code B203 is resolved or not. 

2) Check Your Ink Cartridge

Carry out the steps stated below to check your cartridges.

• First of all, turn off your Canon printer.
• Now, you need to check whether your cartridges have sufficient ink or not.
• Remove the cartridges from your device and check how much ink is left in your cartridges. 
• If you find that one of the cartridges is empty, then you must refill those cartridges to resolve the error. 
• Also, you must make sure that your ink tank is properly installed. 

3) Remove Paper Jams

• First of all, you are required to open the front part of your Canon printer and then remove all the torn pieces of paper. 
• If you see anything stuck in the paper tray and the front area of your device. Just pull out the blue thumbwheel piece and then clear it up.
• Now, connect your printer to your PC and electrical outlet. 
• Now, try to print something and check if the issue is fixed or not.
• In case you find anything blocking your printer, then you must remove those blockages to fix the Canon printer error code B203. 

4) Update Drivers

• In order to update the printer drivers, you need to first press and hold the Windows and R key simultaneously. 
• Now, the run dialog box will appear before you on the screen. Now, you need to type devmgmt.msc. 
• Press the Enter key.
• Now, you will see the Device Manager page appearing on your screen. 
• After that, start looking for the printer driver. 
• Then, you need to right-click on your printer driver. 
• Now, a pop-up will appear on your printer. Select the update driver option to update your printer driver. 

After updating the driver, you must restart your printer and check if the Canon printer error code B203 is fixed or not. 

5) Uninstall and Reconfigure Your Canon Printer Driver

In case none of the above-mentioned solutions are helping you fix your problem, then you must uninstall your Canon printer driver and then reconfigure it to resolve your issue, You can also turn off your printer and re-open it to check that the ink cartridges are properly placed. 

Fix Canon Printer Error Code B203:

Canon printer error code B203 is a common printer error that users come across while executing a print command. This one error gets in their way of completing their printing work. This printer error generally occurs because of minor problems with your printer such as the need for firmware upgrade, empty cartridge, outdated printer driver, unstable connectivity between the system and the printer, or paper jam.

In case you are also one of the people encountering Canon printer error code B203, then don,t worry. Here, we are available with multiple solutions that can help you fix this issue. So, let's discuss them one by one.

Different Ways to Fix Canon Printer Error Code B203?

Below is the list of various solutions that can help you fix Canon printer error B203. Let us talk about them one by one.

Solution 1: Check Your Ink Cartridge

One of the major reasons why this error occurs is because people forget to refill the ink in the cartridges. Therefore to fix this problem, you need to turn off your printer and ensure that all the ink cartridges are full. Open the ink cartridge access door and pull all the ink cartridges out of your printer.

Also, ensure that there is enough ink in all the cartridges. Refill the ink in the cartridges to resolve the issue. This problem can also arise because of the wrong installation of ink cartridges. Please ensure that you have installed the cartridges rightly.

Solution 2: Do a Power Cycle

Another great way to fix Canon printer error code B203 is to perform a power cycle. Take a look at the steps below to perform a power cycle.

Step 1: First of all, you need to power off your Canon printer.

Step 2: Now, remove the power wire from the electrical outlet.

Step 3: After that, reopen your printer by pressing the power button for a minute.

Step 4: Reconnect the power wire to the electrical outlet and to your printer device.

Step 5: Turn on your computer system as well as your Canon printer.

Step 6: After that, try to take a print out and check if the Canon printer error code b203 is fixed or not.

Solution 3: Take Out the Jammed Paper

A lot of times this error is caused because of paper jams. Mentioned below are the steps that you need to carry out to remove the paper jams.

Step 1: Open the cover in the front and then take out all the torn papers.

Step 2: If you find any obstructions between the front cover and the input tray, then clean it by turning out the thumbwheel.

Step 3: Connect your printer to the power source. Also, connect your printer to your PC.

Step 4: Take a printout and see if the issue appears again or not.

This error code can also show up because of debris or dirt formed on a piece of paper. It can also occur because of a small piece of paper creating a blockage and not letting the printer to work properly. Take out all the materials creating an obstruction and bring your printer back in the working condition.