Question

How to Fix Paper Jam in Epson Printer?

Hello, Please let me know that how to fix paper jam in Epson printer. When i am trying to print then Epson printer jam the paper while printing. I don't know how to resolve it. Help me.

  •   Mick
  • lay  1  Ans
  • lay  May 16, 2021
Answer - 1

Fix Epson Printer Paper Jam :

There is nothing more exasperating then not being able to print a document because of Epson printer paper jam issues. Epson Paper jam error can occur due to several reasons. It can be either because of overfilling of the paper tray. It can also be because of improper seating of the paper in the tray.

Printing labels or torn paper can also lead to Epson paper jam errors. Paper jam issues can either occur inside the product, paper cassette, Duplexer, or Automatic Document Feeder. How to fix paper jam in epson printer, read out the troubleshooting solutions given below.

Fix Epson Paper Jam Inside Issue -

If the paper stuck inside your Epson printer, then these are the steps that you need to carry out to eliminate paper jam issue in Epson printer.

Step 1: Cancel the print job.

Step 2: See if any paper is stuck on the side of the paper feed slot. If yes, then take out the jammed paper from that area.

Step 3: Raise the scanner unit. Don't raise the scanner unit if the document cover is not closed.

Step 4: Check if any paper is stuck in that portion including bits of paper. If you see any jammed paper, then remove it from that area.

Step 5: Put down the scanner unit.

Step 6: Carry out the instructions displayed on the LCD screen of your printer device to clear the paper jam issue. If the issue still persists, then try using the next troubleshooting technique to fix paper jam in Epson printer.

Fix Paper Jam Issue in the Paper Cassette

In case the paper is stuck somewhere in the paper cassette, then these are the steps that you need to perform to clear the paper jam.

Step 1: Cancel the print job

Step 2: Pull out the cassette and then carefully check if there is any paper jammed in that area. If you see the jammed paper, then take it out.

Step 3: See if any paper is stuck inside the product. If yes, then remove it.

Step 4: Now, gently push paper cassette back into its slot.

Step 5: Carry out the prompts appearing on the LCD screen for clearing any error messages. If this method doesn’t help you in getting rid of paper jam error, then try using the next method to fix paper jam in Epson printer.

Fix Epson Paper Jam Issue in the Rear Cover-

These are the steps that you need to execute if your paper gets jammed in the duplexer.

Step 1: Cancel the print job.

Step 2: Press the buttons for detaching the rear cover.

Step 3: Check if any paper is jammed in that area, If yes, then remove it.

Step 4: Open the rear cover.

Step 5: Check if any paper is stuck in the duplexer.

Step 6: Attach the duplexer back with the machine.

Step 7: Carry out the instructions appearing on the screen for removing error messages. If this method also doesn’t help you get rid of the paper jam issue, then carry out the steps to remove the pages stuck in ADF.

Fix Epson Paper Jam Issue in Automatic Document Feeder-

To remove jammed paper from Automatic Document Feeder, carry out these steps:

Step 1: Cancel the print job

Step 2: Take out your originals from the automatic document feeder.

Step 3: Lift the ADF cover. Raise this cover before removing the jammed paper or else you may end up damaging the machine.

Step 4: Remove the jammed paper and then close the ADF cover.

Step 5: Put the ADF tray in its original position.

Step 6: Reload the pages

Step 7: Please ensure that you don’t load the sheets beyond the capacity of Automatic Document Feeder. Also, ensure that the pages are not curled, folded, or bent. Additionally, you need to ensure that the sheets don't have any staples, tape or any other material, which can block the feeder.

Step 8: Carry out the commands on your LCD screen for clearing error messages.

So, the above-mentioned were different methods that you can use to fix paper jam in Epson printer.

  •   Steven
  • lay  March 4, 2024