The most amazing highlight of this printer is the Affordable individual ink cartridges which give you the flexibility to replace the required color only. But, how to change ink on Epson printer WF 2750? Let us take a look at the following steps.
Step 1 : Turn on your Epson printer machine.
If the cartridge has been completely spent up, you will automatically see a message on the LCD screen of the printer. You just need to check the cartridges which have to be replaced with new ones. Then select OK and up arrow button.
In case you are replacing the ink cartridge before you see a warning or error message on the LCD screen, press the up or down arrow button. This will take you to Setup screen of the printer and then you can click OK button.
Next, select the options as Maintenance > Ink Cartridge(s) Replacement and press any one the Start buttons.
Step 2 : Next, you have to open and lift up the scanner unit.
Warning: Never touch the flat white cable present inside the printer. Do not try to open and lift the scanner cover unit while the document cover is open. This might damage the printer internal hardware and hence its functionality.
Step 3 : Press the tab of existing ink cartridges and lift the cartridge system straight up in order to remove it from its position.
Note: It is important to dispose of the used ink cartridges carefully. Do not attempt to use them with the other printer or refill them for reuse.
Warning: In case the ink spills on your skin, clean it thoroughly using soap and water. If the ink splashes into your eyes, quickly clean them using fresh and cold water. If the ink gets into your mouth, spit it out and find a doctor right away before it creates any problem. Most essentially, the ink cartridges should be kept out of the reach of children.
Step 4 : Before setting and installing the new cartridge, shake it gently four to five times. Then after, remove the ink cartridges from its packing.
Caution: Do not remove any labels or seals of cartridge else the ink will leak. Remember not to touch the green chip on the cartridge.
You have to replace the old cartridge with the new cartridge immediately. If the replacement process takes times and you setup the new cartridge after some time, the print head may dry out and may give error by showing 'unable to print' message.
Step 5 : Clean the yellow tape present on the cartridge.
Step 6 : Remove the old cartridge and insert the new cartridge correctly into the holder and push it inside carefully all the way down. When the new cartridge fits perfectly into the place, it will create a click sound on fitting right.
Step 7 : Press the Color button on the printer machine in order to check and ensure that the cartridge has been installed correctly.
Caution: In case if the ink cartridge is installed incorrectly, it will be showing an error message on the display screen. In that case, lift up the scanner cover unit and then push the ink cartridge back to its place again until it creates a click sound.
Step 8 : Finally, close the scanner unit. Once the ink cartridges are set up, the printer will start charging the ink which might take some minutes time to complete. As you see a completion or success message on the LCD screen, the ink replacement is complete for your Epson printer wf-2750.
Note: Remember never to turn off the Epson printer wf-2750 while changing ink from cartridges as this might waste the ink.
Caution: Removing the ink cartridge for later use should be carefully handled. Like, you should protect the ink cartridge section from dirt and dust particles that may damage the sensitive lining of the printer. You should position the ink supply area at the same place as that of the Epson wf-2750.
To store the excess amount of ink, you can use the valve inside the ink supply port. Remember, you should not touch the ink supply port or surrounding area. The ink cartridge should be always kept facing upwards. Cartridges stored upside down might cause ink leakage.
Finally, keep reading the instructions about how to change ink in Epson printer wf-2750 .