HP Envy is an affordable all in one printer designed with HP instant ink for professional printing purposes. For wireless printing and good quality documents, one can simply opt this printer. This series of HP Envy 4520 printers is for home and professional use as it is designed to print everything, for instance-images, documents, files, emails, web pages, etc.
One can easily perform and execute copy and scan operations. With the HP Envy 4520 printer, you can print wirelessly through smartphones and tablets. It supports a high printing speed of up to 16ppm for time-efficient printing.
To get these benefits, one has to first connect hp envy 4520 printer to computer. How to do that? Below given is a simple guide which will help you to how to connect hp envy 4520 printer to computer system.
It is always recommended to check the hardware packaging and instruction manuals whenever you purchase any new electronic item from the store.
In order to connect hp envy 4520 printer to computer, a user has to perform steps in two phases as:
1. Unboxing the printer box
2. Connecting printer to the system
Step 1 : The first step is to check whether the packaging box of the printer is sealed or not. If seal is verified, go ahead with the unpacking of the box.
The printer box should contain the printing machine, an instruction book, a CD, a power cable, phone cord (for fax connection) and ink cartridges.
Step 2 : The printer should be properly placed on a flat and stable surface. Remove the other packing materials from the printer.
Step 2 : Lift the scanner lid to take out the Styrofoam sheet and then close the lid.
Step 3 : Now, unlock the top cover by using the edge handles.
Step 3 : Remove all the packing materials inside the input tray of printer and then close it.
Step 4 : Make sure that you have removed and cleaned all the packing materials inside and outside printer.
Step 5 : Separate out the power cord, CD, user manual and other cables for printer installation
Step 6 : Finally, ensure that all the packaging is removed and no issues will happen during the printing process.
Step 7 : Then, properly connect the power cord of the printer to a power socket to get the best performance.
Step 1 : Firstly, ensure that the power cord is connected to the printer. One side of the cord to the rear side of the printer and another end to the working power socket.
Note: It is always preferred to connect the power cord to a direct socket.
Step 2 : Turn ON the printer by pressing the Power button on its panel. Now, the LCD panel of the printer will display the preference list (for example Country or region, date and time, etc,). You can customize those settings as per your choice and convenience.
Step 3 : The HP printer has an inbuilt LCD screen which is basically a touch screen display. You can tap or press buttons on that display that suits your opinion. Click on the OK button to confirm your customization settings.
Step 4 : The HP Envy 4520 printer has a front loading input tray. Exert the input tray, drag the extender, raise it upwards and check if any packing tapes and cardboards are present there. If yes, remove them.
Step 5 : Now, to start printing, load the paper pile into the load tray. Make sure the papers are properly aligned into the tray. Slide the input tray and check whether the paper is placed properly or not.
Tip: Always use the recommended size and type of printing paper.
Step 6 : Open the ink cartridge access door or section. Carefully remove one of its cartridges by holding only the black plastic surface. Clean the packing plastic tape on the ink cartridge, place the cartridge and close it.
Step 7 : The last step is to download and install the printer driver using a genuine CD or from the official website. After successfully installing the drivers, start the printing process to check the printer's execution and performance.
Note: Ensure that you have downloaded a driver that is more appropriate for your printer.
Hope the above tutorial provided you clear steps to connect hp envy 4520 printer to computer.