How To Clean Printer Heads and Ink Cartridges?

Clean Printer Heads & Ink Cartridges:

A dreaded clogged print head is exactly what is needed to bum out an inkjet user. Sometimes, tiny particles of dust, debris, & dried ink block the small holes located on the printhead.

This leads to the prints coming out streaky, with white lines which should be colored appropriately. If the lines are not colored properly, then this means that the inkjet is only partially jetting. There is also a fact that some inkjet printers clog at a more frequent rate than others.

But, despite the type of brand of inkjet printer a user uses, clogged printheads are a common problem. 

There are Three Types of Printhead Clogs That a User Encounters-

Simple Clogs- The remedy to these types of clogs is performing a head cleaning cycle & a nozzle check on the printer.

Stubborn Clogs- When nozzle Check & head cleaning do not work, you may require the Windex Method.

Hardcore Clogs- If Windex doesn’t work, then it’s time to loosen out the big guns.

How to Obtain Clean Printer Heads & Ink Cartridges?

The printheads of inkjet are mounted in a traditional style on the lower end of a plastic carriage in the printer known as the printhead assembly. The assembly carriage of the printhead holds the ink cartridges & oscillates back & forth.

Now, with the assistance of a belt & a stabilizer bar, the user can spray the ink onto the paper.

Simple Clogs

• Cleanse the printhead using a soft & lint-free cloth, but do not touch the electronic components.
• The printheads are equipped with microscopic holes that shoot out droplets of colored ink. If your printer does not function that effectively, it means that the ink has dried out & it has clogged the printheads.
• Even the air bubbles in the ink cartridge can lead to the blocking of the nozzle. But, the simple clogs can often be cleansed by subjecting them through a head cleaning cycle & performing a nozzle check on the printer.
• Instead, run the head cleaning cycle twice before performing a nozzle check.
• You should keep in mind that there should be no missing lines on the printout. If there are, then run another head cleaning cycle.

Stubborn Clogs (The Windex Method)

Sometimes the physical effort is needed to clean stubborn clogs. Using warm water is often helpful & it can loosen the ink that has dried on the nozzles. At other times, you will require Windex or some ammonia-based solvent for performing deeper cleaning functions.

So, above were the methods to Clean Printer Heads & Ink Cartridges. Hope you like the article.

The internet constantly keeps vibrating with conjecture. Further, the Epson printhead has micro-holes that deliver better quality prints, but they clog more easily. The clogging of Canon PIXMA inkjets happens on a less frequent basis as they run a preemptive head cleaning cycle.

All the users want clean printer heads & ink cartridges but the clogging of Canon PIXMA inkjets happens very often as they run a very preemptive head cleaning cycle.