How to Setup HP Officejet 200 Mobile Printer?

Did you recently buy an HP Officejet 200 mobile printer? If yes, then you must be wondering how to set up this printer. The process involves removing packaging material, installation of battery, loading paper, setting control panel preferences and then finally placing the ink tanks in your printer.

In this post, we have discussed different features of HP Officejet 200 mobile printer.

Features of hp officejet 200 mobile printer

HP Officejet 200 mobile printer has many outstanding features. some of them are listed below.

• Wi-Fi, Wi-Fi Direct and USB connectvity.
• 5-sheet input tray
• Rechargeable battery
• Output quality better than inkjet desktops
• Printing from USB thumb drives
• Fast photo printing
• Lighter than the previous model
• Portable

Process to Setup HP Officejet 200 Mobile Printer:

Step 1: Remove the printer from the box

• Take out your printer.
• Remove the packaging material and tapes covering your printer.
• Raise the upper cover of your printer and take off the tape covering the inside of your HP Officejet 200 mobile printer.
• In the next step, you need to remove all the tapes and packaging that are covering up the ink cartridge access door.

Step 2: Place the battery inside your printer

• Move the printer around and make sure the side of the printer is facing.
• Push and pull the battery cover to remove it.
• Unwrap the battery
• Place the battery in its slot by sliding it and then go to the battery's left side. If you hear click sound, then it means it is properly placed.

Step 3: Connect power wire and set preferences

• First of all, connect the power wire to the side of your printer and then connect the side of the power wire to the power source.
• Power on your printer.
• Go to the control panel of your printer and then press arrow buttons. Also, select your region and language of your preference. After that, select OK.

Step 4: Load sheets in the input tray

• Open your HP Officejet mobile printer's lid and lift your control panel.
• Slide the paper guides as far as you can.
• Load some sheets in the input tray and then allow paper guides to rest against the sides of paper.

Step 5: Install the ink cartridges

Install the ink tanks that came along with your printer.

• Open the ink cartridge access door to place your ink cartridges.
• Allow your cartridge to become silent and idle before you continue with the procedure.
• Take out the ink cartridges from the packaging. Make sure that you only touch the black plastic of your ink cartridge.
• Now., remove the plastic tape that is covering your ink tank.
• Place the ink cartridge back in its original slot and press the ink cartridge until it clicks into place.
• Now, close your ink cartridge access door.
• Once you are done installing the ink cartridges, an alignment page will get printed automatically. This alignment is essential to get extraordinary print quality. In case the alignment page did not print, then manually print an alignment page.

a) Go to the control panel of your printer and then choose setup and use the arrow buttons.to choose setup and then click on OK.

b) Press the down arrow to choose Tools. After that, select OK.

c) Now, select the option of align your printer and then click on OK. Now, you will see Aligning appearing on your Control Panel. You may hear a beeping sound and then the alignment page will be printed.

This will set up your HP printer software and then install your printing software.

Conclusion

So, these are the steps that you need to perform in order to setup HP Officejet 200 printer. With many outstanding features, this becomes a remarkable choice for many users. It has so much more to offer in comparison to many popular models of HP and Epson. Ths is an incredible choice for those who want to fulfill their printing requirements on the go.