How to Fix Brother Printer Won’t Connect to Wireless Network?

Fix Brother Printer Won’t Connect To Wireless Network:

Printers are one of the most essential office equipment used in homes and offices. Whenever they stop working or cause errors, your work gets delayed leading a lot of troubles for you. Isn't that true? There are some common problems faced by printer users.

Likewise, you will find that your Brother Printer Won’t Connect To Wireless Network. Are you facing the same problems? If yes, then go ahead with this step by step solution to fix the connection issues with your printer.

If you are looking for an easy method to connect your Brother printer to the wifi network, you have landed on the right page. Without any worries, we will help you to set up a connection between your printer and configured wireless network.

Every user while making use of any device comes across various kinds of issues or problems. That is fine, sit back and relax. With the help of this guide, you will be able to connect your printer to wifi and resolve your issues instantly.

Methods to Follow When Brother Printer Won’t Connect To Wireless Network:

Configure the Wireless Settings:

Step 1: Connect your Brother machine to the source using the AC power cord.

Step 2: Connect the printer to the AC power outlet. Switch on your Brother printer machine. Remember, that you are not connecting the USB cable yet.

Step 3: Now, you can turn on your computer.

Step 4: Insert the provided CD-ROM into the CD-ROM drive of the computer.

Step 5: Know the complete wireless settings before you configure them. By understanding the wireless network settings of the WLAN access point/router, you will be able to make configurations better.

If it is a Personal Wireless Network Configuration:

Step 1: Try to set up the printer machine for the smaller wireless network, kind of home environment.

Step 2: Check and carefully note the existing wireless network settings below.

• Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID)
• Network Key (Password, Security Key or Encryption Key, etc.)
• Make sure that the Brother machine only supports the use of the first WEP KEY.

Step 3: If in case, your router is making use of more than one WEP KEY, set the KEY used as the first WEP KEY.

How to Know the Details of Your WLAN Router?

If you don't know the network name (SSID, ESSID) and the network key for your router using the following steps:

Step 1: Check the sides of your WLAN access point/router and see whether you see any details.

Step 2: If you don't find details on the router side, check the documentation provided with WLAN access point/router.

Step 3: The initial network name is probably the manufacturer’s name or the model name.

Connection Steps For Macintosh Users:

Step 1: With the help of Setup Wizard inside the machine’s control panel, you can manually configure the Brother machine.

Step 2: You will find all the instructions to configure the printer from the control panel.

Further, if your Brother Printer Won’t Connect To Wireless Network then continue with the guide.

Steps to Setup Brother Printer on a Wireless Connection:

Step 1. The printer installation screen appears automatically where you can choose your model and language.

Step 2. The steps for printer installation vary from device to device or system to system.

Step 3. Continue following the on-screen commands and set up the configuration of your printer on a wifi network.

Step 4: In between of complete procedure, you will see the Firewall/AntiVirus detected screen on your device. Here, you can choose Change the Firewall port settings and enable the network connection. Set the recommended setting and continue with the installation process.

Step 5: Once the setup is done, a connection result message will appear on the LCD and a WLAN report will automatically be printed for your convenience.

Still, if the connection problems are not fixed, then take expert help from our support team. We are just a click away and you can take the benefits of instant solutions.

Note: Most of you are installing their Brother printer for the first time, so you might not get success in the first attempt. So, try all the possible configuration methods when your Brother Printer Won’t Connect To Wireless Network

Hope the answer serves a useful guide to setup your Brother printer.