How to Resolve Unable to Initiate Error Code for Brother MFCJ6545DW or MFCJ6945DW Printers?

Resolve “Unable to Initiate” Error Code for Brother MFCJ6545DW or MFCJ6945DW Printers:

There are two common reasons why the message "Unable to Initiate" with a two-digit code may appear. There could be a mechanical issue or a foreign object stuck in the machine, like a paper clip or torn piece of paper. Follow the below mentioned steps to Resolve “Unable to Initiate” Error Code for Brother MFCJ6545DW or MFCJ6945DW Printers.

Please be aware that the steps below might still apply to your specific Brother printer model even if it isn't listed here.

The "Unable to Initiate" error may be resolved by taking the subsequent actions:

Step 1: Lift the scanner cover through the open position with both hands using the finger grips on either side of the device.

Step 2: Examine the machine's left (2) and front (3) hand corners as well as its centre with great care, and discard any paper scraps and other foreign objects that may be stuck there.

Step 3: One of two reasons will usually cause the message "Unable to Initiate" with a two-digit code to display. It appears that there is either a mechanical issue or a foreign object—like a paper clip or torn piece of paper—stuck inside the machine.

Step 4: Look inside and take out any stuck paper or foreign objects.

Step 5: Rotate the machine to face front again after closing the jam clear cover.

Step 6: Raise the scanner cover on the flat-bed to unlock the lock (1). Then, using both hands, gently press the cover supporting down (2) and shut the cover (3).

Step 7: Inspect and eliminate any stuck paper or foreign objects from within.

Step 8: Rotate the machine to face front again after closing the jam clear cover.

Step 9: Raise the scanner cover on the flat-bed to unlock the lock (1). Then, using both hands, gently press the cover supporting down (2) and shut the cover (3).