How to Fix the Paper Feed on a Brother Printer?

Fix the Paper Feed on Brother Printer:

Like every Brother Printers also need regular maintenance to perform perfectly. Some maintenance depends on how often the machine is used, how many pages are printed on a regular basis, etc. If you see Brother printer paper feed not working, the problem is likely due to either a dirty pickup roller, separation roller, or both.

Many of the users face this Brother printer paper feed problem while using the printer. Consequently, to fix paper feed on my Brother Printer we have discussed here the Brother printer troubleshooting steps, and as well as that we have also mentioned the reasons behind the error too, thus, go through this post the reason comes with the solution, I hope that the steps given here would be helpful for all of you.

Step to Fix Brother Printer Paper Feed Issue:

Here explained some steps to fix Paper Feed on Brother Printer Issue, therefore, follow the steps given below:

Reason 1: Incorrect Position of Photo Bypass Tray-

It could also be a reason which may lead to the issue, so to deal with this error, while printing, when you take photos printing, change the position of the bypass try. If you do not bring it back to its normal printing position, you will see that there won’t be any paper feed issue. Therefore, check the position of the bypass tray to fix the problem.

Reason 2: The Printer is Out of Paper or the Paper is not Loaded Correctly

In this case, do any one of these steps as mentioned below.

• Remove the paper and carefully reload the paper.
• Refill the paper tray carefully
• Then press OK.

Reason 3: Brother Printer Paper Jammed

In this case, remove the paper carefully from the machine by following the guidelines described in the user manual. If the error occurs while doing two-sided print or copy, then, in that case, the paper feed rollers are tinted with ink,

so for that follow the steps as mentioned here below.

1. From the socket, unplug the brother printer.
2. After this, pull out the paper tray carefully.
3. Now with a soft, moist cloth, carefully clean the front side of the roller in side by side motion.
4. Wipe the roller with a dry cloth; make sure that there is no moist.
5. Now, after this, clean the back side of the roller by lifting the Jam Clear flap.
6. Use the soft, moist cloth and dry cloth as in the above step.
7. Now carefully place the tray back into the machine.
8. After this, re-connect the power supply.

Reason 4: Paper pick-up rollers have paper dust.

This could also be the reason, so to fix this error, carefully follow the steps as mentioned below.

1. First of all clean the paper dust.
2. cut the power supply From the Brother printer.
3. Now, take the paper tray out from the printer.
4. At the back of the printer, look for the jam clear cover.
5. With the help of the soft, moist cloth, clean the paper pick up rollers.
6. For complete cleaning, keep turning the roller gently.
7. To remove the moisture, use a soft cloth and wipe the roller.
8. Now close the Jam clear cover properly.
9. Put the paper tray back to its original position and switch ON the printer.

Reason 6: The paper tray is not inserted properly

To fix this issue, follow the steps as mentioned below.

• Carefully, take the paper tray out from the printer.
• Now after this, reinstall it and check that appropriately locked at its original position.
• After this press OK.

I hope that the information mentioned here was helpful for all of you, so please share with these Brother printer troubleshooting steps with your friends, so that they can also get support for this Brother printer paper feed not working error. And if you still face the error, then ask for the team to provide Brother Printer service, and fix the paper feed on a Brother Printer issue.