February 02, 2018
Hp printers are considered to be one of the finest printing machines available in the market. People from all across the globe use these printers to print out their important files and documents in hard copy format. Hp printers are considered to be technical marvels but its complexity and issues cannot be denied either.
Users complain about these printers varies from simple paper jams to complicated connectivity issues. In this article, I will address one such problem of Hp printer not connecting to a computer. I will discuss different troubleshooting techniques to resolve the issue. Follow the instructions in the next section carefully.
Hp printers not connecting to a computer could occur for various reasons, here I will discuss a few troubleshooting techniques to resolve the problem.
1. Restart Printer, Router, and Computer: One of the most basic troubleshooting methods is to restart your printer, computer, and your wifi. Sometimes most of the problem for these complex machine get resolved by a simple reboot. In case it did not resolve the issue move to next step.
2. Check the Network and Printer Connection Status: Make sure that your printer and computer are connected to the same network otherwise either of your devices would not be able to detect your printer. Make sure to connect them to your home network and reboot the system.
3. Update Drivers & Firmware: In case the above two methods are not able to resolve the issue, update your drivers. Drivers are software program responsible for controlling the hardware part. These drivers tend to get outdated or corrupted so make sure to update your driver to the latest available version from your official vendor’s website. It is free of cost.
These are some of the troubleshooting techniques to resolve the issue. Hopefully, these helped you in resolving the problem. In case if the problem still persists, contact HP printer Technical Support as it could be a hardware failure.
Hp printers are one of the most trusted printers and have good machine life as well. In order to ensure maximum output from it, make sure to give it a maintenance every other month at least. Clean the paper tray and printhead regularly to ensure smooth working.
Also, make sure to update its driver and firmware updated from time to time. As these updates not only replace the old software but also resolves certain critical and non-critical issues associated with the previous version.