How do I Connect My HP Envy 7640 Printer to WiFi?

Connect HP Envy 7640 Printer to WiFi:

HP Envy 7640 printer is a masterpiece manufactured by HP. It has an impressive structure and is suitable for both office as well as home use. This machine is a lot more sophisticated in comparison to the models launched earlier.

It has a responsive and light touchscreen that allows the user to do taps and swipes. On top of that, the product allows direct wireless printing. The product configures the wireless network on its own and gets connected to it automatically.

Here is How We can Connect HP Envy 7640 Printer to WiFi Network:

Step 1: Preparing to Install

Prior to starting with the process of connect HP 7640 printer to WiFi, please ensure that your computer, printer, and access point are powered ON. Also, to connect with the network, you must have the SSID name and encryption of your access point.

To establish a wireless connection, these are a few things that you are going to need.

a) SSID name

• Password securing your network
• PC connected to the Wi-Fi
• Access to the internet

b) Please ensure that both your PC as well as the router are powered on. Also, make certain that your computer is connected to the same Wi-Fi network to which your printing machine is connected. Power on your printer and keep it close to your PC. Also, make sure that your printer is within the range of your wireless network.

c) Remove any ethernet wires if connected.

Step 2: Connect HP 7640 Printer to WiFi

Open the wireless setup wizard on your HP 7640 printer machine for connecting it to the Wi-Fi

a) Power ON your printer.

b) Go to the Control Panel of your printer device and tap on the wireless icon.

c) Tap on the settings icon.

d) After that, tap on wireless settings.

e) Now, touch on wireless setup wizard

f) Read out the instructions stated on the Control Panel carefully and follow them.

Step 3: Install and Download the Printer Software

For downloading and installing the printer drivers from the official website of HP, these are the guidelines that you need to follow.

a) Power ON your printer

b) Remove the USB cord from the machine if required. You may have to connect the USB cord if required during the software installation process.

c) Go to driver and software downloads on the HP support website.

d) In case a page shows up displaying Let’s identify the product to get started. Select your printer and then choose model number of your printer. Now, select Submit.

e) If you wish to change your operating system, then select change, choose your version and then click on change.

f) Go to the heading of driver, select download for downloading the complete software product.

So, this article was all about the process to connect your HP Envy 7640 printer to wifi network. We hope that the above-mentioned steps help you in successfully set up HP envy 7640 wireless.

Also Read:

• How to Reset HP Deskjet 3510 Ink Cartridge?
• How do I Connect a HP Wireless Printer to My iPad?
• HP Printer not Connecting to Computer