Hi, i have bought a new brother printer for office use, I want to connect brother printer to with my wi-fi, but i not able to connect this printer by wifi. if you have any suggestion, please give me any idea to connect my brother printer.
Before configuring the Brother Printer wireless settings, You should have some information about your network.
And these details you can check at the backside of your router.
Step 1: You need to use the control panel on your brother printer setup wirelessly.
Step 2: First connect the AC power cord int your printer and turn on the printer.
Step 3: Press MENU.
Step 4: Press up or down arrow key to choose the network setting / wireless setup.
Step 5: Press up or down arrow key to choose the network and press ok.
Step 6: Press up or down arrow key to choose the WLAN and press ok.
Step 7: Press up or down arrow key to choose the setup wizard and press ok.
Step 8: When Lan enables... appears to enable the wireless network.
This will start the wireless setup wizard.
THAT'S HOW YOU CAN SETUP BROTHER PRINTER WIRELESSLY.
Getting started: Connect Brother Printer to WiFi
Step 1: You’re going to need the password and network name for your wireless network (this can usually be found on the back of the modem)
Step 2: Ensure your printer and computer are switched on Set up your WIFI connection
Step 3: Select the ‘menu’ button (if you have a touchscreen select ‘Settings’ or ‘Spanner & Screwdriver icon’ then select ‘All settings’)
Step 4: Using the arrow keys, scroll down to ‘Network’ then press OK Select W-LAN Using the arrow keys, scroll down and choose the ‘Setup Wizard’ Press OK (it may take a moment while it searches)
Step 5: Select your WIFI network (if you are prompted ‘use WPS?’ you can select NO) Enter your WIFI password, then press OK You’ll be prompted ‘apply settings?’
Step 6: Press 1 to select ‘YES’ If your password is correct a message will read ‘connected’ A ‘connection ok’ report will then print automatically.
how to connect brother printer to wifi, connect brother printer to wifi.
It’s very important to connect Brother Printer to WiFi because without an internet connection, you can’t set up the printer driver. And before having printer driver on your computer, you could not print.
So, in case you don’t know how to connect Brother Printer to Wifi in order to make WiFi connection in between your Brother Printer wifi setup and your computer, simply take Brother wifi Printer setup Help. You will surely come to know the entire methods at the easiest form.
Whenever you connect Brother printer to wifi, you can advantage of printing from anywhere, even from your mobile. Through USB cable, Brother Printer can also be configured for a wireless network to take your computer on the network.
Before establishing a connection, you are required to have a password and the network name. So, keep these requirements in your hand so that you can enter them when it is asked to give in.
Wireless Direct will give you to connect the printer to your computer or mobile device directly without a Wi-Fi access point/router; the printer operates as a Wi-Fi access point.
Make sure the Wireless Direct settings of the printer. Once you connect to a mobile device, use a Windows PC or Mac to confirm the settings.
For Windows PCs-
Connect the printer and computer with the help of USB cable. Open the Printer setting tool on your computer, and tap on the communication settings button.
Make sure that Wireless directs are chosen for Selected Interface in the General tab. Look at the FAQ: "Using the Communication Settings (for Windows)" for more information on the Communication Settings.
For Mac Computers-
Infrastructure Mode gives you permission to connect the printer to a computer or mobile device through a Wi-Fi access point/router.
Before You Begin first of all you must configure the Wi-Fi settings of your printer to communicate with your Wi-Fi access point/router. After the printer is configured, computers or mobile devices on your network will have access to the printer.
Step 1: First, write down the SSID (network name) and password (network key) of your Wi-Fi access point/router.
Step 2: Connect the printer and computer with the help of USB cable.
Step 3: Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on. The Wi-Fi sign starts flashing in blue once every three seconds.
Step 4: Configure the Infrastructure Mode settings of the printer.
For Windows PCs
Open the Printer Setting Tool on your computer, and tap on the communication settings button. Chose Wireless LAN for Selected Interface in the General tab and select Infrastructure for Communication Mode in Wireless Settings in the Wireless LAN tab.
Look at the FAQ: "Using the Communication Settings (for Windows)" for more information on the Communication Settings.
For Mac computers
Open the Wireless Device Setup Wizard included in the Printer Driver Package, and then follow the on-screen instructions.
If you have not yet downloaded the Printer Driver Package, go to the Downloads page to download the package. Double-click the downloaded file. The Wireless Device Setup Wizard might be found in the Utility folder.
Step 5: Type the SSID that you wrote down, or click Search and select the SSID from the displayed list.
Step 6: Enter the password as Passphrase.
Step 7: Click Apply.
Once the connection between the Brother printer and your Wi-Fi access router is set up, the Wi-Fi sign lights in blue. Computers and mobile devices that are on the same network as the printer will have access to the printer.
How to Connect Brother Printer to WiFi?