Please let me know that how to setup Samsung Xpress M2020W printer. I am facing some issues while printing with Samsung printer. Help me.
1
Ans
Samsung Xpress M2020W wireless printer is one of the best printer devices present in the market today. This printer device is great for official purposes as well as home use. This is an affordable device that is easy to use and offers high productivity. The print speed of this device is 20 ppm and allows you to streamline your workflow.
If you recently purchased Samsung Xpress M2020W wireless laser printer and you don't know how to set up this device, then worry not as here you will learn how to set up this printer device. Below mentioned are the simple steps that you need to perform in order to set up your Samsung Xpress M2020W printer.
The process to set up the Samsung Xpress M2020W printer is quite simple.
Below are the easy steps that you need to perform in order to set up Samsung Xpress M2020W wireless laser printer.
Step 1: Prior to moving ahead with the setup process using a USB wire, you must ensure that your Samsung printer device is turned on. Plus, you are required to check that the LED light of your printer device is flashing.
Step 2: Then, you are required to connect the USB wire to the USB port of your system. Now, take the other end of the USB wire and connect it to the USB port of your Samsung printer device.
Step 3: Once the connection process is over, you are required to access the wireless setup by opening the wireless settings app.
Step 4: After that, select the Next option on the wireless setup page. This will begin the setup process of your printer.
Step 5: Now, go to the wireless setup page of Samsung Easy and select the Next option. Select the option of "Using a USB cable" for the initial setup of the printer where it is not connected to the network. Now, select "Next".
Step 6: Now, you are required to connect your Samsung printer model to your Mac temporarily. Now, select Next.
Step 7: Now, the installation wizard will start looking for the attached devices and then gives you wireless info.
Step 8: In case the wizard is not able to locate your printer. then a "Printer not found" message will appear on your screen. To fix this problem, you must carefully check the USB cable running between your Samsung printer device and Mac system.
Carry out the additional steps to complete the setup process.
Step 1: Now, you are required to select the Next option given below the printer not found dialog box. Try using a new USB wire for the connection.
Step 2: If you see the "printer not found" message again, then the dialog box will appear one more time.
Step 3: Then, you are required to select your network from the list of networks appearing before you on the screen. Now, select Next.
Step 4: if you are facing any issues related to the selection of the network, then you need to open your printer's advanced settings option. This enables you to enter the network's information manually.
Step 5: Once you are done entering the network information, then you need to enter the network password in the password section.
Step 6: Now, allow your printer to connect to the network.
Step 7: Then, you are going to receive the Wi-Fi direct information. If you wish to turn on Wi-Fi direct on your printer device, then you must ensure that the checkbox is checked. Once you are done checking the box, then select Next.
Step 8: After that, the on-screen prompts will inform you that a secure connection has been established. Now, select Finish.
Copyright 2018-23 © Printer Technical Support | All Rights Reserved
How to Setup Samsung Xpress M2020W Printer?