Having the objective to set the IP address by the OKI printer operator panel, you just have to exercise a series of some real sequential steps that will eventually help you set the IP address by the OKI printer operator panel in just a short time span effectively.
So just draw reference from this elaborate guide so that you are able to achieve this objective to set the IP address by the OKI printer operator panel forthwith.
Step 1 - If you really want to set the IP address by the OKI printer operator panel then you have to begin by pressing the symbol to cause the “Network Menu” to open followed by pressing the “OK” button.
Step 2 - Here you have to make sure that the TCP/IP protocol is enabled. You can get this done in a manner explained hereunder.
(1) First ensure that the TCP/IP page is displayed on the screen followed by hitting the “OK” button.
(2) Now again press the “Menu” key to exhibit the TCP/IP window.
(3) Continue by pressing the “OK” button to add “*” just to the right of the value and then press the “Back” button.
Step 3 - You also have to display the IP address set by pressing the key a couple of times.
Just follow the course mentioned below if “Automatic” is displayed in the second line.
(1) First press the “OK” button followed by pressing the ”Menu” key.
(2) Resume by hitting the “OK” button to facilitate adding “*” just to the right of the value and then cause to press the “Back” button.
Step 4 - Ensure that you again press the button to unfold the IPV4 address with “B431dn” as the IP address followed by pressing the “OK” button which will definitely mark one step forward to set the IP address by the OKI printer operator panel.
Step 5 - The first IP address will start getting reflected which you can change to make it to the relevant one. In this attempt, you can use or button to adjust such IP Address.
Step 6 - Now resume pressing the “OK” button to finally effectuate the change.
Step 7 - Remember that when you are all set to modify the fourth digit it becomes advisable that you add “*” to the right of the given value.
Step 8 - Now if you press the key then jump to the next step wherein you will have to set the “SUBNET MASK” and the “GATEWAY ADDRESS” in the same manner as you did for the IP Address previously.
Step 9 - Finally resort to pressing the “Online” button and wait until the “Please wait/Network Initial” message is displayed after which the process to set the IP address by the OKI printer operator panel is accomplished.