Question

How to Clean the Print Heads on a HP 8600 Printer?

Hello, Please let me know that how to clean the print heads on a HP 8600 printer. I am facing some issue in this. Help me.

  •   Mick
  • lay  1  Ans
  • lay  3 years ago
Answer - 1

Clean Print Heads on HP 8600 Printer:

Are you having an HP series 8600 printer but unable to print your documents? This problem might frequently occur while you are about to use the printer for your home or work purpose. However, the problem can be fixed if you clean the print heads on a HP 8600 printer.

Moreover, you will find that the print heads won't work once after they get clogged or blocked. Additionally, print heads may also not work due to dirty electrical contacts. So, it's important to clean the print heads on a HP 8600 printer. Let us proceed with this easy guide on print head cleaning.

Steps to Clean the Print Heads on a HP 8600 Printer for Ink Clog Removal

Step 1: Firstly, press and continuously hold the "Power" button on your HP 8600 printer.

Step 2: Next, press the "Cancel" button twice and then press the "Resume" button once again.

Step 3: Lastly, you can now release the "Power" button and begin the electronic printhead cleaning process into flow.

Steps for Electrical Contacts Cleaning-

Is essential to clean the print heads on a HP 8600 printer, so you can start with cleaning electrical contacts. Simply follow the given steps below.

Step 1: In the first phase, lay down three or four stacked pieces of paper over the surface in front of your HP 8600 printer. Next open the printer cover. In case the printer carriage doesn't automatically move to the far left side of the printer, then push and hold the "Resume" button until it does. At last, you can unplug your HP printer once the carriage has moved to the far left side.

Step 2: In the next phase, you need to grasp and lift up on the printhead latch and lift the handle on the firstprint head. Following that, you need to pull the printhead out of the printer.

Step 3: Next, hold down the printhead carefully in one hand over the paper at the front side of the printer without even touching the ink nozzles. Here, you can gently wipe the copper-colored square electrical contacts present on the printhead using a lint-free microfiber cloth, lens-cleaning cloth or soft, coffee filter.

Step 4: Now, you need to set the printhead on the paper using the ink nozzles facing up.

Step 5: Keep repeating steps 3 and step 4 for each printhead of the printer.

Step 6: You need to rub the electrical contacts inside the printer gently using the lint-free cloth or filter paper.

Step 7: You can now plug back the ink nozzles into your printer and push the "Power" button.

Step 8: Lastly, insert the printhead back into its color-matched housing. Make sure that you are pressing it firmly into the slot to make sure that the electrical contacts on the printhead touch the contacts inside the printer.

Here, pull down the printhead latch over the print head and push it down firmly in order to secure the printhead in place. Repeat these same steps for each printhead, and close the cover when finished. Finally, you are done with the complete cleaning process and you can check with document printing.

What if Print Heads are Still not Working on Your Printer?

Well, if you are still facing printing issues after you clean the print heads on an HP 8600 printer then you can follow the basic troubleshooting steps. This includes:

  1. Disconnect the printer from the power source and reset the machine. After unplugging, wait for 60 seconds and reconnect it.
  2. Always use genuine HP ink cartridges for the best printing quality.
  3. Wait and allow automatic servicing to complete.
  4. Make sure that the paper type is appropriate for the device. You can try using a different paper if it doesn't suit your printer.
  5. Check for the printer settings and update to its latest firmware.

HP 8600 printers, also popularly known as the HP Officejet Pro K8600 or Pro K8600dn, are kind of inkjet printers that make use of four individual large, high-capacity HP #88 ink cartridges--one black and one each for cyan, magenta and yellow--for printing.

These ink nozzles get clogged or blocked from time to time resulting in blank spots and spaces that include missing dots, lines or partially non-printed characters.

Hope this guide is useful to clean the print heads on an HP 8600 printer.

  •   Steven
  • lay  8 months ago