Are you using the HP printer to get the printouts? Your printout is not clear? Then its time to change the cartridge of the printer. It’s easy to do, I will explain the method to Clear an HP Check Printer Cartridge Error Code.
Error messages appearing on your HP printer most times will protect you from printing until you clear the error. If you get a message saying that you have an incorrect ink cartridge, a flashing cartridge light meaning a worst color cartridge or you are told to take out the color cartridge, you must troubleshoot the issue, reset the printer and fix the error before you can continue.
Step 1) Switch on the printer and unlock the cover where the ink cartridge is placed. Remove the cartridge.
Step 2) Put the ink cartridge back in the carriage. Lock the cover. Switch the printer off for a minute.
Step 3) Switch the HP printer on. Print a page for the test.
Step 4) Switch on the printer and uncover the ink cartridge location. Take out the cartridge.
Step 5) Take out the cartridge and take a clean, lint-free, dry cloth to wipe the contacts.
Step 6) Clean from the top of the contact to the bottom. Do this for all contact.
Step 7) Put the HP ink cartridge back in the carriage. Switch the printer off for some minute.
Step 8) Switch the HP printer on. Print a check page.
Step 9) Switch on the HP Deskjet or Photosmart printer, uncover and remove the black and color cartridge. Lock the cover.
Step 10) Turn off the power cord from the outlet and remove the cables running to the computer or router. Wait for a minute, plug the power cord and then plug all cables.
Step 11) Remove the cover and put the black and color ink cartridges back to the place. Switch on the printer.
Step 12) Get a test page. If this does not fix the problem, you will need to get new ink cartridges at an office supply store, such as Staples or OfficeMax, or a discount retailer, such as Walmart or Target.
Step 13) Switch on the Officejet or PSC all-in-one printers.
Step 14) Uninstall the power cord from the back of the printer and wait for a minute.
Step 15) Place the power cord back into the printer. Place your finger on the "Power" button until the printer is turned on.
Step 16) Take out a test page printout to see if this has troubleshoot the problem. If not, you will need to get a new color ink unit at any office supply store.
Hence you have successfully Clear an HP Check Printer Cartridge Error Code.
The Canon Pixma Mp160 is the best and all-in-one printer, scanner and fax machine. Make sure you use the right replacement cartridges for your MP160; installing the incorrect cartridge type could protect your printer from working or cause it to fail. Use precaution to prevent ink spilling or dripping on you.
Step 1) Identify the cartridge that needs to be replaced. Hit the "Copy" button to display the ink level. "BLK" refers to your black ink cartridge; "COL" indicates your color cartridge. If the display is only one bar (or none), then the cartridge should be changed.
Step 2) Uncover the top compartment (scan lid) on your Canon printer. Take back the compartment support legs to hold it open.
Step 3) Wear gloves, and then push the cartridge down to unlock it. Pull it toward you to dispatch it from the printer.
Step 4) Take out the tape strip from the changed ink cartridge. Place the new ink cartridge (black on the left side, color on the right) at an angle, using the gold circuit facing down and towards the front of the printer. Force the cartridge up to lock it in place.
Step 5) Do the process again if you are replacing more than one cartridge. Turn off the scan lid when you are done with it. If the "Low Ink" error does not go away, then turn off the printer, wait some minutes and turn on again.
Above in this, I have provided the best and simple way to Clear an HP Check Printer Cartridge Error Code.