If you don't like wireless printing, then you need to use a USB to connect your PC to the printer in order to get all your printing work done. But sometimes you face the problem where your printer is not able to print using USB. It may happen if your printer's connection with the USB device is not working properly. Here, we have listed out different solutions that you can apply to fix this issue.
A lot of computer-related problems get fixed by trying this workaround. All you have to do is to turn off your computer and then turn it on again. The unrecognized USB device can be a result of computer faults that can be fixed by restarting the computer. Please ensure that you close all the apps before you go to the Start Menu to restart your PC.
We connect USB to the same port out of habit because we find it convenient. There is a chance that the port you are using is not working. To fix this issue, you just need to connect your USB to another port. If this fixes the problem, then that means the USB port that you were using previously got defective.
There is a chance that there is some problem with the computer or device you are using. In order to fix this problem, you need to connect your USB to some other computer. If your USB works fine on another device, then that means your device has some serious problem.
A lot of updates have drivers. So, installing a Windows update may fix your problem. Below are the steps that you need to follow to make sure that you have recent Microsoft updates.
In case you are still experiencing issues, then you can fix your problem by applying the solutions mentioned below.
Step 1: Press your Windows key and R key together at the same time.
Step 2: After that, you need to open Device Manager and then you are required to enter devmgmt.msc in the Run area.
Step 3: Then, you need to search for the Local Universal Serial Bus Controller. Enlarge this option by selecting it.
Step 4: After that, search for the USB root hub and then select it.
Step 5: Now, open the new window and then click on Properties. After that, search for the Power management option.
Step 6: Select OK to save your settings. After that, repeat for Root Hubs.
Step 7: To bring this into effect, you need to restart your computer.
Below are the steps that you need to follow in order to stop fast startup.
Step 1: Sometimes fast startup can cause problems. In order to fix this problem, you can deactivate the function that can help you wish USB issues.
Step 2: Now, enter Control Panel in the Startup Menu search area.
Step 3: After that, go to the section of "Hardware and Sound".
Step 4: Select the Power option and then see the available options.
Step 5: You may also see the option "switch on fast startup". Now, check whether this option is checked or not.
Step 6: Select Save to save the changes.
Step 7: Then, restart your USB device.
Step 8: After that, restart your USB device.