Do you want to learn how to install a Konika Minolta print driver for Windows 10? If yes, then read the guide below and carry out the right steps to install a Konica Minolta print driver for Windows 10.
It is advisable to download the print driver by going to the Konica Minolta to make sure that you are downloading the correct and safe files. Carry out the steps below to install the Konica Minolta print drivers for Windows 10.
Step 1: First of all, go to the main website of Konika Minolta.
Step 2: After that, go to the search bar and type in the model number of your printer.
Step 3: Then, you will see the search results appearing before you. There, click on the link of the "drivers".
Step 4: Go to the tab of drivers and then select the option of download for Windows 10, 64 bit.
Step 5: Select the right link to download. Usually, the appropriate link is the first one.
Step 6: After you are done downloading the driver, the next thing that you need to do is to create a new printer driver folder. Now, move the compressed folder of drivers to the new folder that you created just now.
Step 7: Then, right-click and extract all the files.
Step 8: Launch the folder of drivers. This is the folder that you are required to copy on the USB drive is required.
Step 9: Now, within the folder, you need to run setup 64.
Step 10: Select agree and then select Next.
Step 11: This is the screen where you will see the defaults of your printer device below the option of "advanced setting".
Step 12: After you are done, select Next.
Step 13: Install one or many printers by selecting the devices that you wish to have.
After that, there are a few things that you need to note. Now, you can add the address below the tab of properties. You can also rename your printer and add authentication settings. You can also use the option of adjusting the print settings and set it back to defaults.
Step 14: Now, finish.
So, these are the steps that you need to perform in order to install the Konica Minolta print drivers for Windows 10.