Question

How to Setup HP Laserjet Pro MFP m28w?

Let me know that how to setup hp laserjet pro mfp m28w. I am facing some issues while printing with HP printer. Help me.

  •   Mick
  • lay  1  Ans
  • lay  2 years ago
Answer - 1

Setup HP Laserjet Pro mfp m28w

You can install the HP LaserJet Pro MFP m28w driver on your Windows and Mac. The driver's software is in charge of making sure that the Printer functions appropriately. Here is how you can set up the driver after installing it. Turn on your Printer and install the print cartridge.

You have to make sure that the push button mode is supported by your router as well as your Printer; the setup process requires a physical WPS button; make sure that your network either has WPA2 or WPA button, try to change the default settings, make sure you turn on WPS push button mode to establish a connection. You can also read the manual carefully to help you with the wireless setup of HP LaserJet Pro MFP m28w. 

Steps to Install HP LaserJet Pro M28w Driver on Windows

Carry out the simple steps given below in order to install the HP LaserJet Pro M28w driver on Windows.

Step 1: First of all, download the HP LaserJet Pro driver by going to the download section.

Step 2: Now, open the downloaded file by double-clicking on it.

Step 3: Wait for a while to enable the installer verification process.

Step 4: Carry out the installation instructions to complete the process.

Step 5: You can read out the complete process in the PDF file of the user guide.

This will successfully install the HP LaserJet Pro M28w driver on Windows.

Steps to Install HP LaserJet Pro M28w Driver on Mac

Below are the simple steps that you need to carry out in order to install the HP Laserjet Pro M28w driver on a Mac.

Step 1: Download the driver by going to the download section.

Step 2: Open the downloaded file by double-clicking on it.

Step 3: Wait for some time for verification to be completed.

Step 4: Carry out the instructions appearing on the screen to complete the installation process.

Step 5: You can read out the complete procedure in the user manual PDF.

Steps for the Wireless Setup of LaserJet Pro

Here in this wireless setup procedure, you will learn how to connect an HP printer to a wireless network using the WPS method. Using this method, you will be able to print from your PC on the same network without connecting your printer device to a computer system.

Not every printer device has wireless printing functionality. Therefore, you need to ensure that your printer device is connected to the network before you go ahead with the setup process.

Step 1: Remove the packaging and take out your printer.

Step 2: Connect the power wire to the electrical outlet and then power on your printer. After that, install the print cartridges. Allow your device to carry out the startup process. This includes printing an alignment page.

Step 3: Please ensure that your wireless router and printer support the pushbutton mode. Take a look at the manual of your wireless printer and manual.

Step 4: Your wireless router needs to have a physical WPS button. Otherwise, you cannot carry out the setup process.

Step 5: Check that your network has WPA2 or WPA security. You cannot connect some of the WPS wireless routers using this method if you are not using WEP security.

Step 6: Sometimes, the connection doesn't happen if you use the manufacturer's default settings for the network name.

Step 7: if you wish to connect your wireless router to the wireless printer, then you need to turn on the WPS push button mode on your printer.

Step 8: Read out your printer's manual to learn how to turn on the WPS push button on your router device.

Step 9: After that press the WPS button on your router.

  •   Tom
  • lay  8 months ago