If your router is supportable to Wi-Fi protected setup which is also known as WPS, you can configure your machine very easily without a computer machine. We can find the WPS pin on Brother printer by following many ways. In this blog, we are explaining to find the WPS Pin Brother printer.
Step 1 : First, you are required to turn on your machine by connecting it with a power outlet.
Step 2 : Then press the menu option on the control panel of the brother printer.
Step 3 : Press the arrow symbol to choose a network and after choosing network simply press the OK button.
Step 4 : Press the same arrow button to choose the WLAN and then press the OK button.
Step 5 : Press the arrow button to choose WPS w/PIN code and later press the OK button.
Step 6 : you will see 8 digit pin code on the LCD panel and the machine will start searching for an access point for 5 minutes.
Step 7 : Using the computer which is on the network, you need to type http://access point IP address in the installed browser (where router IP address is the IP address of the device which is used as a registrar) go to the WPS setting page and input the PIN which the LCS shows in to the registrar and then follow on-screen instructions where the registrar is normally the router.
Note: The setting page is different for the different router which depends on the router’s brand. If you are using window vista computer as a registrar, you have to follow the instructions below.
Note: For using window vista computer as the registrar, you are required to register your network in advance.
Step 8 : If your LCD shows connected, your machine is connected successfully to your router. you can use your machine in a wireless network.
If the LCD shows a connection failed option, the machine is not connected successfully to your router. You need to make an attempt again in another 5 seconds. If you are getting the same message from the machine, you have to perform hard reset operation with its default settings and try this whole process again.
For Windows: you have completed the wireless network setup, and if you would like to continue installing the driver and necessary software for operating the device, you have to choose to install MLF-pro suit from the CD ROM and for MAC, you have to choose start OS X from the CD ROM.
Step 1 : First, turn on the machine by supplying power to Brother printer.
Step 2 : Tap on the menu option.
Step 3 : Press the network option.
Step 4 : Press the WLAN option.
Step 5 : Press arrow to display Brother printer WPS Pin code and then press WPS PIN Code.
Step 6 : The LCD panel will show an 8 digit pin code and then the machine starts searching for the router for 5 minutes.
Step 7 : Using the computer which is on the network. You have to type http://access point IP address in the address bar of the installed browser (where access point browser IP address of the device that is used as a registrar) go to the WPS setting page and input the PIN which displays on the LCD panel of the Brother printer and follow the on-screen instruction.
Note: the setting page might be different depending upon the router’s model.
Your Brother printer supports the printing function seamlessly by being capable of getting integrated with your computer using the typical cord-based connectivity along with catching up with the computer network in wireless mode as well.
But for your Brother Printer to get paired with the computer in the wireless mode there is one simple method that ought to be executed by you which comes prescribes that you must find the WPS PIN on the Brother printer and must subsequently punch in the same to facilitate pairing of your Brother Printer with your computer or router.
In this unique guide, we will see how to find the WPS PIN on the Brother Printer and how to establish the Brother Printer Setup using the same WPS PIN going forward so that you can continue getting printouts from your Brother Printer by operating it in the wireless mode.
The WPS PIN is one very unique code that should be punched in on the occasion when your Brother Printer Setup is under process and asks you to find the WPS PIN on the Brother Printer and then enter the same to establish wireless connectivity between your Brother Printer and Computer.
Here is a simple way to find the WPS PIN on the Brother printer
Step 1 - To begin with, just go activating your Brother Printer followed by going to its Control Panel.
Step 2 - Now select the Menu button and then go on to access the Network Setup Option.
Step 3 - Here you have to choose the WLAN option followed by selecting the WPS PIN option consequent to which your Brother’s Control Panel will start reflecting the 8-digit unique WPS PIN.
Step 4 - Just take down this 8-digit distinctive WPS code as it will be shown on the screen just for a while which will mark your success to find the WPS PIN on the Brother Printer.
The next step after you find the WPS PIN on the Brother Printer is actually moving ahead to establish the Wireless Brother Printer Setup by adhering to the impeccable procedure mentioned hereunder.
Step 1 - Make sure that your Brother Printer is capable of functioning properly and then get the Power Cord in your hand.
Step 2 - After ensuring that the Power Cord is free from faults, just connect one end of it to the Power Outlet followed by inserting its other end into your Brother Printer’s power socket.
Step 3 - Now, power up your Brother Printer by turning on the Power switch located on the Power board.
Step 4 - Just continue accessing your Brother Printer’s Control Panel and go on to choose the Menu option.
Step 5 - At this stage just go selecting the Network Menu and further continue to choose the WLAN.
Step 6 - Proceed further and go on to select the displayed WPS PIN option as a result of which an 8-digit unique code will begin appearing on the Brother Printer’s panel and which will also stimulate your Brother Printer to start searching for the relevant Access Point.
Step 7 - Simply copy the PIN and subsequently open the internet browser on your computer and go find the Access Point IP Address (It is worth taking note of that a router’s IP address is actually the device’s IP address which is effectively used as a Registrar).
Step 8 - Next, you should resort to accessing the WPS Setting page and must enter the WPS PIN.
Step 9 - And, continue adhering to the on-screen instructions and accomplish the entire process eventually.
Please do consider this very noteworthy point that if you are employing a Windows Vista Computer as the Registrar then you should register the Brother Printer over the network in accordance with the procedure set out here.
Step 1 - Just begin by accessing Windows Vista and selecting the Network.
Step 2 - Now, choose to click on “Add a wireless device”.
Step 3 - At this point in time, just select your Brother Printer followed by entering the unique WPS PIN and clicking on “Continue”.
Step 4 - Here you are just required to select your preferred Network followed by adhering to the on-screen tips and instructions to accomplish the process.
Note 1: - In case you are working on Windows 7, you just have to go to the Control Panel and click on the “Network and Internet” option and then further follow Step 2,
Step 3, and, Step 4 again as stated above in a bid to pair up your Brother Printer in wireless mode while working on Windows 7.
Note 2: Also, if your Brother printer starts reflecting a message that it is in sync with the router then you can easily continue using your Brother Printer in Wi-Fi mode.