Are you wondering why your printer is printing lines? This issue can be quite problematic when your printer starts printing lines. Printer printing lines on the page can be quite problematic and it happens because of a damaged, dirty, or blocked printhead.
Blocked nozzles of the cartridge and non-removal of protective seals correctly when you install a new cartridge can also lead to missing lines of print. If you wish to fix this problem, then you have come to the right place.
Here, you will get to know everything that you need to know to fix the problem of inkjet printer printing lines.
An inkjet printer printing lines or missing lines can appear if the carriage which contains the printhead becomes damaged or dirty. With time, the ink dries up and builds up on the nozzles. When it comes out, the cartridge moves across the page and the ink transfers to the paper. This can cause blurry prints or the wrong color to come out.
In case you installed a new cartridge recently, then you must check whether the protective seals have been removed properly or not.
Below are the easy steps that you need to follow to clean the cartridge nozzles.
Dirt building up on your cartridge holder where the printhead is located can also cause the problem of printer printing blank pages.
Below are the steps that you need to follow in order to clean the printhead.
If your laser printer is missing or skipping lines, then that may happen because you didn't remove the seals properly. This error can also appear if there is damage in the fuser or drum unit.
To fix this issue, below are the simple step that you need to follow.
Step 1: If possible, you must run the fuser cleaning process by going to the menu of your printer. You can always find this under the maintenance section.
Step 2: If you find the general clean process, then you must run it.
Step 3: Run the toner or drum and check any dirt or damage on your cylinder. At the same time, you need to make sure that you don't touch it.
Step 4: If you find that the drums are dirty or damaged, then you must try to clean it using an air duster.
Step 5: Reinstall the toner or drums and then try again.